Numerical Simulation of Non-Stationary Heat Conduction in Axisymmetric Bodies

Polatov Askhad, Sapayev Shikhnazar, Matyakubov Marks
Bulletin of TUIT: Management and Communication Technologies
№ 1(2)2025 DOI:10.61663/251tuitmct2
Open article file

Abstract

The distribution of the temperature field of elements of three-dimensional structures is examined in the article and the influence of non-homogeneities on the temperature field in three-dimensional axisymmetric structures is studied. Based on the variational formulation of the problem, a finite element model for solving axisymmetric problems of heat distribution in three-dimensional bodies was built based on the finite element method; a computational algorithm of the solution and the software were implemented. Shape functions corresponding to linear triangular elements are used in the finite element solution to the problem. They ensure its continuity at the boundary with neighboring elements since this distribution is linear along any side of the triangle and with the same change in value at the nodes, the same changes will occur along the entire inner boundary. A discrete finite element mesh model is a set of parameters that consist of the total number of finite elements and mesh nodes, arrays of their node coordinates, and node numbers of finite elements. To verify the reliability of the results obtained, a computational experiment was conducted, related to the study of the effect of the increase in the number of finite elements on the convergence of solutions. Analysis of the experimental results confirms the numerical convergence of temperature values as the finite element mesh is refined. At the initial stage of the study, the influence of temperature distribution for homogeneous structural elements was studied.

References

[1] L. J. Segerlind Applied finite element analysis (2nd edition, Wiley, New York, 1984), 11(7), pp. 427. https://doi.org/10.1002/zamm.19790591017
[2] N. P. Zhukov, N. F. Mainikova, S. S. Nikulin and O. A. Antonov, Solving heat conduction problems by the finite element method (Publishing House TSTU, Tambov, 2014), pp. 80–90.
[3] V.Kalmanovich, A. A. Kartanov, M. A. Stepovich, “On some problems of modelling the non-stationary heat conductivity process in an axisymmetric multilayer medium”, Journal of Physics Conference Series, 1902(1):012073, 2021. DOI: 10.1088/1742-6596/1902/1/012073
[4] A.Pilipenko, S.Petrov, “Computer simulation and modelling system of non-stationary heat exchange processes”, MATEC Web of Conferences 155, 01036, 2018. https://doi.org/10.1051/matecconf/201815501036
[5] N.Chernov, A.Palii, L.Tolmacheva, M. Poklonskaya and M. Nickolskaya Numerical simulation of the heat-relief capacity of an axisymmetric body in a gas flow. Web of Conferences 273, 04010 (2021), https://doi.org/10.1051/e3sconf/202127304010
[6] Rak J. Mathematical model of non-stationary temperature distribution in the metal body produced by induction heating process. EPJ Web of Conferences 114, 02102 (2016). https://doi.org/10.1051/epjconf/201611402102
[7] O. C. Zienkiewicz and R. L. Taylor, The Finite Element Method for Solid and Structural Mechanics, Butterworth-Heinemann, UK, 2005, 631 p.
[8] L. M. Ivannikov. Solution of a two-dimensional problem of heat conduction by the finite element method in Mathcad. Khabarovsk: Pacific National University, 2011. -28 p.
[9] A.M. Ikramoв and A.M. Polatov, Finite element modeling of nonstationary problems of heat conduction under complex heat transfer, in The Bulletin of Irkutsk State University. Mathematics Series, 45, pp. 104–120 (2023). https://doi.org/10.26516/1997-7670.2023.45.104
[10] A. Ikramov, А.Polatov, S. Pulatov and S. Zhumaniyozov, Computer simulation of two-dimensional nonstationary problems of heat conduction for composite materials using the FEM, in International Conference On Actual Problems Of Applied Mechanics - APAM-2021, AIP Conference Proceedings, 2637(1), pp. 040006. http://dx.doi.org/10.1063/5.0118684
[11] A. Khaldjigitov, Y. S. Yusupov, R. S. Khudazarov and D. A. Sagdullaeva On the thermoplasticity constitutive relations for isotropic and transversely isotropic materials. (International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), Aug 2019), ISSN (P): 2249-6890; ISSN (E): 2249-8001 Vol. 9, Issue 4, pp. 467-478. https://doi.org/10.24247/ijmperdaug201946
[12] A. Khaldjigitov, Y. S. Yusupov, A. F. N. Rasedee and N. M. A. Nik Long, Mathematical modeling and simulation of the coupled strain space thermoplasticity problems (IOP Conf. Series: Journal of Physics: Conf. Series 1212, 2019) 012023, doi:10.1088/1742-6596/1212/1/012023.
[13] A. Polatov, A. Ikramov, S. Jumaniyozov and S. Sapayev, “Computer simulation of two-dimensional unsteady-state heat conduction problems for inhomogeneous bodies by the FEM”, in Modern Problems of Applied Mathematics and Information Technology (MPAMIT 2021), AIP Conference Proceedings,2781(020019). https://doi.org/10.1063/5.0144813
[14] Askhad Polatov, Akhmat Ikramov, Shikhnazar Sapayev, Jahongir Odilov, Study of the Effect of Geometrical Features on the Temperature Field of a Cylindrical Structure. International Scientific Conference on Modern Problems of Applied Science and Engineering (MPASE2024). AIP Conference Proceedings 3244, 020017 (2024); https://doi.org/10.1063/5.0241776